|
GRK 8x1-1/4" CABINET SCREW 100ct
#8 x 1-1/4" GRK Cabinet Screw
See a video of the GRK Cabinet Screws in action!
Size: #8 x 1-1/4"
Recessed Star Drive: Zero stripping, with 6 points of contact. Low Profile Washer Head: Presses flush against work surface for extra holding power.
W-Cut: Low torque, smoother drive.
Zip-Tip: No pre-drilling faster penetration.
Case Hardened Steel: for high tensile, torque & shear
strength.
Climatek Coating is AC257: code approved for use in treated lumber (for interior/exterior use).
Excellent for: Mounting Cabinets, Cabinet Constructiion, Vinyl Siding.
GRK's Low Profile Cabinet screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 gauge (4mm) diameter for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet screws can be usedin vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing powerdelivered by the washer head. Available in lengths from 1-1/4" to 3-1/8".
View Details
|
CS8114HP |
GRK 8x1-1/4" CABINET SCREW 100ct |
71 |
12.95 |
/ EA |
114069 |
|
|
GRK 8x1-1/2" CAB SCREW 100ct
GRK 8x1-1/2" CAB SCREW 100ct
View Details
|
CS8112HP |
GRK 8x1-1/2" CAB SCREW 100ct |
9 |
12.95 |
/ EA |
114073 |
|
|
GRK 8 x 2" CAB SCREW 100ct
GRK 8 x 2" CAB SCREW 100ct
View Details
|
CS82HP |
GRK 8 x 2" CAB SCREW 100ct |
6 |
15.95 |
/ EA |
113077 |
|
|
GRK 8x2-1/2" CABINET SCREW 100ct
#8 x 2-1/2" GRK Cabinet Screw
See a video of the GRK Cabinet Screws in action!
> Built In Washer Head
> No Pre-Drilling Unless Material Requires
> Interior/Exterior Use
> Fine Threads
Excellent for:
Mounting Cabinets , Cabinet Constructiion, Vinyl Siding
GRK Cabinet screws were designed specifically for uses in cabinet construction and installation.
All Cabinet screws are manufactured in a #8 gauge (4 mm) diameter. These powerful screws are thin enough to prevent most material splitting, while still providing sufficient strength to guarantee a secure installation. The Cabinet screw washer head design presses flush against any cabinet surface.
View Details
|
CS8212HP |
GRK 8x2-1/2" CABINET SCREW 100ct |
59 |
18.95 |
/ EA |
113079 |
|
|
GRK 8x3-1/8" CABINET SCREW 50ct
#8 x 3-1/8" GRK Cabinet Screw
See a video of the GRK Cabinet Screws in action!
Size: #8 x 3-1/8"
Recessed Star Drive: Zero stripping, with 6 points of contact. Low Profile Washer Head: Presses flush against work surface for extra holding power.
W-Cut: Low torque, smoother drive.
Zip-Tip: No pre-drilling faster penetration.
Case Hardened Steel: for high tensile, torque & shear
strength.
Climatek Coating is AC257: code approved for use in treated lumber (for interior/exterior use).
Excellent for: Mounting Cabinets, Cabinet Constructiion, Vinyl Siding.
GRK's Low Profile Cabinet screws are designed specifically for use in cabinet construction and installation. Manufactured in a #8 gauge (4mm) diameter for universal size convenience. Thin enough to prevent most material splitting, while providing sufficient strength to guarantee a secure installation. The washer head design presses flush against any material surface. Builders have discovered that short Cabinet screws can be usedin vinyl siding installation, which makes this fastener ideal for both interior and exterior applications. The Cabinet screw can also be used for light duty framing applications where a smaller diameter shank is necessary, yet a need exists for drawing powerdelivered by the washer head. Available in lengths from 1-1/4" to 3-1/8".
View Details
|
CS8318HP |
GRK 8x3-1/8" CABINET SCREW 50ct |
14 |
13.95 |
/ EA |
114083 |
|
|
GRK 8x1-1/2" FIN.TRIM 100 ct
#8 x 1-1/2" FIN-Trim Finishing Trim Head Screws
See a video of the GRK FIN-Trim Head Screws in action!
Recessed Star Drive: Zero stripping, with 6 points of contact
Trim head: for a clean finished look
W-Cut: Low torque, smoother drive
ZIP-TIP: No pre-drilling faster penetration
ESR-3201 Approved for structural application
Case Hardened Steel: for high tensile, torque and shear strength Climatek Coating is AC257: code approved for use in treated lumber For interior/exterior use
Climatek finish
View Details
|
FT8112HP |
GRK 8x1-1/2" FIN.TRIM 100 ct |
8 |
12.95 |
/ EA |
119724 |
|
|
GRK 8x2" FIN.TRIM 100 ct
#8 x 2" FIN-Trim Finishing Trim Head Screws
See a video of the GRK FIN-Trim Head Screws in action!
Recessed Star Drive: Zero stripping, with 6 points of contact
Trim head: for a clean finished look
W-Cut: Low torque, smoother drive
ZIP-TIP: No pre-drilling faster penetration
ESR-3201 Approved for structural application
Case Hardened Steel: for high tensile, torque and shear strength Climatek Coating is AC257: code approved for use in treated lumber For interior/exterior use
Climatek finish
View Details
|
FT82HP |
GRK 8x2" FIN.TRIM 100 ct |
2 |
15.95 |
/ EA |
119728 |
|
|
GRK 8x2-1/2" FIN.TRIM 100 ct
#8 x 2-1/2" FIN-Trim Finishing Trim Head Screws
See a video of the GRK FIN-Trim Head Screws in action!
Recessed Star Drive: Zero stripping, with 6 points of contact
Trim head: for a clean finished look
W-Cut: Low torque, smoother drive
ZIP-TIP: No pre-drilling faster penetration
ESR-3201 Approved for structural application
Case Hardened Steel: for high tensile, torque and shear strength Climatek Coating is AC257: code approved for use in treated lumber For interior/exterior use
Climatek finish
View Details
|
FT8212HP |
GRK 8x2-1/2" FIN.TRIM 100 ct |
10 |
17.95 |
/ EA |
119730 |
|
|
GRK 8x2-1/2" FIN.TRIM 605 ct
#8 2-1/2" FIN-Trim Finishing Trim Head Screws
See a video of the GRK FIN-Trim Head Screws in action!
Recessed Star Drive: Zero stripping, with 6 points of contact
Trim head: for a clean finished look
W-Cut: Low torque, smoother drive
ZIP-TIP: No pre-drilling faster penetration
ESR-3201 Approved for structural application
Case Hardened Steel: for high tensile, torque and shear strength Climatek Coating is AC257: code approved for use in treated lumber For interior/exterior use
Climatek finish
View Details
|
FT8212PP |
GRK 8x2-1/2" FIN.TRIM 605 ct |
3 |
74.95 |
/ EA |
16730 |
|
|
GRK 8 x 2" FIN.TRIM WHITE 100ct
#8 x 2" FIN-Trim Finishing Trim Head Screws in White
See a video of the GRK FIN-Trim Head Screws in action!
Size: #8 x 2"
Recessed Star Drive: Zero stripping, with 6 points of contact. Trim head: For a clean finished look.
W-Cut: Low torque, smoother drive.
Zip-Tip: No pre-drilling faster penetration.
Case Hardened Steel: For high tensile, torque & shear strength. Climatek Coating is AC257: Code approved for use in treated lumber
Finish: White powder coated.
GRK's Trim Head screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. Our Trim Head screws have the smallest screw head available; with screw lengths from 1-1/4" (30mm) to 5" (125mm). Most material splitting is prevented because of the Trim Head screw's exceptionally small head and the W-Cut thread design. Fin/Trim screws are also available in white powder coated finish to blend in with white wooden trim boards.
*FOR BEST RESULTS, TRIM SCREWS SHOULD BE DRIVEN AT HALF SPEED. TO PROLONG THE LIFE OF THE #10 BIT, DO NOT USE AN IMPACT DRIVER ON THE #8 TRIM HEAD SCREW.
View Details
|
FTWH82HP |
GRK 8 x 2" FIN.TRIM WHITE 100ct |
50 |
15.95 |
/ EA |
96060 |
|
|
GRK 8 x 2" RT COMP WHITE 100ct
GRK 8 x 2" RT COMP WHITE 100ct
View Details
|
RTWH82HP |
GRK 8 x 2" RT COMP WHITE 100ct |
4 |
16.95 |
/ EA |
17628 |
|
|
GRK 8x2-1/2"FIN.TRIM WHITE 100ct
GRK #8 2-1/2" WHITE CLIMATEK FINISH / TRIM Head Screw
See a video of the GRK FIN-Trim Head Screws in action!
Size: #8 x 2-1/2"
Recessed Star Drive: Zero stripping, with 6 points of contact. Trim head: For a clean finished look.
W-Cut: Low torque, smoother drive.
Zip-Tip: No pre-drilling faster penetration.
Case Hardened Steel: For high tensile, torque & shear strength. Climatek Coating is AC257: Code approved for use in treated lumber
Finish: White powder coated.
GRK's Trim Head screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. Our Trim Head screws have the smallest screw head available; with screw lengths from 1-1/4" (30mm) to 5" (125mm). Most material splitting is prevented because of the Trim Head screw's exceptionally small head and the W-Cut thread design. Fin/Trim screws are also available in white powder coated finish to blend in with white wooden trim boards.
*FOR BEST RESULTS, TRIM SCREWS SHOULD BE DRIVEN AT HALF SPEED. TO PROLONG THE LIFE OF THE #10 BIT, DO NOT USE AN IMPACT DRIVER ON THE #8 TRIM HEAD SCREW.
View Details
|
FTWH8212HP |
GRK 8x2-1/2"FIN.TRIM WHITE 100ct |
57 |
16.95 |
/ EA |
96065 |
|
|
GRK 8x2-1/2"RT COMP WHITE 100ct
GRK 8x2-1/2"RT COMP WHITE 100ct
View Details
|
RTWH8212HP |
GRK 8x2-1/2"RT COMP WHITE 100ct |
5 |
17.95 |
/ EA |
96075 |
|
|
GRK 8x2"FIN.TRIM WHITE 605ct
FIN/Trim Finishing Trim Head Screws
See a video of the GRK FIN-Trim Head Screws in action!
Recessed Star Drive: Zero stripping, with 6 points of contact
Trim head: for a clean finished look
W-Cut: Low torque, smoother drive
ZIP-TIP: No pre-drilling faster penetration
ESR-3201 Approved for structural application
Case Hardened Steel: for high tensile, torque and shear strength Climatek Coating is AC257: code approved for use in treated lumber For interior/exterior use
White powder coated finish
View Details
|
FTWH82PP |
GRK 8x2"FIN.TRIM WHITE 605ct |
6 |
74.95 |
/ EA |
16828 |
|
|
GRK 8x2-1/2"FIN.TRIM WHITE 505ct
GRK #8 2-1/2" WHITE CLIMATEK FINISH / TRIM Head Screw
See a video of the GRK FIN-Trim Head Screws in action!
Size: #8 x 2-1/2"
Recessed Star Drive: Zero stripping, with 6 points of contact. Trim head: For a clean finished look.
W-Cut: Low torque, smoother drive.
Zip-Tip: No pre-drilling faster penetration.
Case Hardened Steel: For high tensile, torque & shear strength. Climatek Coating is AC257: Code approved for use in treated lumber
Finish: White powder coated.
GRK's Trim Head screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. Our Trim Head screws have the smallest screw head available; with screw lengths from 1-1/4" (30mm) to 5" (125mm). Most material splitting is prevented because of the Trim Head screw's exceptionally small head and the W-Cut thread design. Fin/Trim screws are also available in white powder coated finish to blend in with white wooden trim boards.
*FOR BEST RESULTS, TRIM SCREWS SHOULD BE DRIVEN AT HALF SPEED. TO PROLONG THE LIFE OF THE #10 BIT, DO NOT USE AN IMPACT DRIVER ON THE #8 TRIM HEAD SCREW.
View Details
|
FTWH8212PP |
GRK 8x2-1/2"FIN.TRIM WHITE 505ct |
6 |
74.95 |
/ EA |
16830 |
|
